CemWeek Search

12

... in their Gorakhpur factory. With 65 t/h at an average product fineness of 3,750 cm²/g according to Blaine, the planned MVR 2500 C-4 represents the medium size of the portfolio of ready2grind plants. ...

20

... tons per hour. The format of the products has already been increased to 2500 mm, and the uniformity of the paper web profile has been improved. Now, 70 percent of PZBM products are produced with indicators ...

14

... lines; it has the design speed of 2500 mpm, with the mother roll width of 6660 mm and will be dedicated to the production process of Medium Liner Board paper. This product, having the weight range between ...

17

... a maximum diameter of 2500 mm. The advanced software, present on the two machines, manages in an extremely intelligent way the control of the web tension, preventing or minimizing the loss of bulk during ...

05

... terms of design, will have a paper width of 6660 mm and will guarantee a maximum production speed of 2500 mpm (operating speed). They are combined with sophisticated technological innovations including: ...

09

... scheduled for July 2019. The new rewinder is destined to the Shandong plant and will be installed downstream of the PM36 and PM37 paper lines; it has the design speed of 2500 mpm, with the mother roll ...

01

... E-WIND P100 rewinders, for the mill located in the Jingzhou District, China. The E-WIND P100 Paper Rewinders will have a paper width of 7960 mm and will guarantee a maximum production speed of 2500 mpm ...

26

The company was recently taken over by Arkhbum Europack had a technical start-up of a new corrugator in Fosber (Italy), according to parent company Arkhbum. Trimmed width of the machine is 2500. ...

12

... subsidiary of the Hua-Chuan Group. The rewinders have a design speed of 2500 mpm, support a mother roll width of 6760 mm and are used in the production process of high-strength medium board paper. The ...

13

... a new steel Yankee dryer TT SYD-2500MM and the complete steam and condensate system. In 2016, Toscotec supplied PM3, a complete MODULO tissue line. Mario Speranza, CEO of Celupaper says, “Thanks to the ...

02

... 2500S. Designed to serve the food and beverage industry with an exceptionally wide range of sizes, the PMC 2500S forms cups and containers ranging from 4 to 46 ounces in round and non-round configurations. ...

18

... ranging from 400 x 450 mm to 2500 x 1650 mm. A folio ream wrapper with single and double stack non-stop palletizer completes the large order scope, matching the size range of the Falcon folio sheeter. ...

18

... re-shredding. For this purpose, Vecoplan has installed two VAZ 2500 RS F T single-shaft shredders. The operator is able to run the high-performance shredders at constant throughput with homogenous output ...

18

... re-shredding. For this purpose, Vecoplan has installed two VAZ 2500 RS F T single-shaft shredders. The operator is able to run the high-performance shredders at constant throughput with homogenous output ...

01

... Pfeiffer ready2grind milling circuit and product storage systems as well as a packing plant supplied by Claudius Peters. The Gebr. Pfeiffer MVR 2500 C4 will be installed together with a feed system, ...

10

...  TELE-FONIKA Kable S.A. is one of Europe's leading cable & wire manufacturers. Based in Poland, we produce over 25000 different products ranging from 1kV to 500kV and distribute to our valued customers ...

13

... scheduled to begin in the first quarter 2018. The broad project scope includes: • Clinker mill feed system with 4 hoppers • MVR 2500 C-4 roller clinker mill with classifier and ancillaries • Process ...

01

... Andritz, has successfully completed the launch of a refrigerator recycling plant at AO Recycling in Telford, United Kingdom, reports Andritz. Key equipment supplied by ANDRITZ is the proven QZ 2500 Cross-Flow ...

22

... MODULO fabric machine with single layer inbox, single press configuration and Yokee TT SYD2500MM steel made from Toscotec steel . The new line will allow the optimization of the production cycle, both ...

10

... facility to LafargeHolcim Colombia, including a mill with MVR technology. The MVR 2500 C-4 mill will be installed together with the feeding unit, filer, blower, and other components. The finished installation ...

10

... facility to LafargeHolcim Colombia, including a mill with MVR technology. The MVR 2500 C-4 mill will be installed together with the feeding unit, filer, blower, and other components. The finished installation ...

10

... a mill with MVR technology. The MVR 2500 C-4 mill will be installed together with the feeding unit, filer, blower, and other components. The finished installation will include a storage facility mounted ...

06

Order includes a MVR 2500 C-4 mill Gebr. Pfeiffer received an order to supply equipment for a grinding facility of LafargeHolcim Colombia, reports Gebr. Pfeiffer itself. Germany-based Gebr. Pfeiffer ...

02

The new equipment will generate electricity and heat for the Mexican mill Switzerland’s GE Power will supply LM2500+ aeroderivative gas turbine to Bio-Pappel’s San Juan del Rio mill, Quertaro, Mexico. ...

18

... tissue machine with single-layer headbox, single press configuration and TT SYD-2500MM featuring TT Milltech-MYH (monosystem gas heated hood). The scope of supply also includes electrification and control ...

31

... the most energy efficient equipment, state-of the art emission control and leading process control systems in an expanded plant with a 12500 TPD production capacity. Konecranes has responded to Xuan ...

29

... 2500 to 3000 metric tons on a daily basis, reports Rising Kashmir. The two month long log-jam between two truckers unions in Khrew, Zaffron Truckers Union and Al Khudam Tipper-Truckers’ Union, has halted ...

24

Waste heat powered kilns reduce energy consumption  ...

27

... rounds now pay around USD 13000 and fronthauls around USD 22500. The Pacific rates have come to around USD 9000, and as owners refuse to fix at charterers low fixing ideas, more and more ballasters are ...

07

... million tons per year. They are also constructing additional kilns to produce more cement. The Cemex Apo plant has two kilns, the first kiln producing 2500 tons per day (TPD), while the second kiln produces ...

22

Firm says this has also enabled it to improve production process efficiency.   The Grange Quarry in Scotland has credited a washing system that combines a logwasher with high-frequency screening ...

25

Firm to build new production line.[$]   [PAID=]A firm from Sichuan, china has signed a 2500 t / d clinker cement production line project in Algeria, with a total investment of 40 billion.   According ...

15

... washed sand and aggregates, reports Hub 4.   According to the report, the new plant is situated at Kelhead Quarry near Annan in Scotland and includes the M2500 E4 mobile washing plant and AggMax 83 ...

23

... capacity is a guaranteed 2500 tons per hour (tph) at a bulk density of 1.9 tons per cubic meter (t/m3). The linear travelling loader will be suitable for all export commodities the terminal handles, including ...

10

... in a CDE mobile washing plant for operation at their Elford Quarry site in Tamworth, which included an M2500 E3, an A400 Aquacycle Thickener and an Aggmax 150 for feeding, screening, sandwashing and stockpiling. ...

07

... Today, CSN has a clinker unit, installed in the town of Arcos (MG). There, the company began operation in May 2011 and produces 2500 tons daily. Supplying 100% of the milling unit Presidente Vargas in ...